0.5mm thickness PP cup Thin Wall Injection Molding Machine Servo System
Detailed Product Description
HIGH-SPEED INJECTION MOLDING MACHINE
It helps protect the system from fluid hammer.
This protects system components particularly pipe work, from both potentially destructive forces. An additional benefit is the additional energy that can be store while the pump is subject to low demand. These are often placed close to the demand to help over come restrictions and drag from long pipe work runs. An accumulator can maintain the pressure in a system for periods when these are slight leaks without the pump being cycled on an off constantly. when the temperature changes cause pressure excursions the accumulator helps absorb them.
These series machines take the accumulator to help inject, which having high cost performance improve the speed ,quicken the machine circle time, higher the efficiency, and especially suitable for the ultrathin
SPECIFICATIONS
| SPECIFICATIONS | | | | |
| DESCRIPTION | UNIT | MZ-170 |
| INJECTION | | A | B | C |
| SHOT VOLUME | CM3 | 277 | 318 | 392 |
| SHOT WEIGHT | G | 260 | 298 | 368 |
| (PS) | OZ | 9.1 | 10.5 | 12.9 |
| SCREW DIAMETER | MM | 42 | 45 | 50 |
| INJECTION PRESSURE | MPA | 190 | 166 | 135 |
| SCREW L:D RATIO | | 21.5:1 | 20:1 | 18:1 |
| SCREW STROKE | MM | 200 |
| SCREW SPEED (STEPLESS) | R/MIN | 0~200 |
| CLAMPING UNIT | | | | |
| CLAMPING FORCE | KN | 1700 |
| OPENING STROKE | MM | 430 |
| PLATEN SIZE | MM*MM | 680*680 |
| SPACE BETWEEN TIE BARS | MM*MM | 460*460 |
| MOLD THICKNESS (MIN-MAX) | MM | 200~530 |
| MAX.DAYLIGHT | MM | 960 |
| HYDRAULIC EJECTION STROKE | MM | 140 |
| HYDRAULIC EJECTION FORCE | KN | 50 |
| POWER UNIT | | | | |
| HYDRAULIC SYSTEM PRESSURE | MPA | 17.5 |
| PUMP MOTOR(V/S) | KW | 15/18.5 |
| HEATING CAPACITY | KW | 12.6 |
| NUMBER OF TEMP CONTROL ZONES | | 4+(NOZZLE ) |
| GENERAL | | | | |
| DRY-CYCLE TIME | SEC | 2 |
| OIL TANK CAPACITY | L | 210 |
| MACHINE DIMENSIONS | MXMXM | 4.9*1.2*2.0 |
| MACHINE WEIGHT | KG | 5300 |
HYDRRULICS
Variable displacement pump System
Servo System
Oil suck filiter
Oil temperature control and alarm
By-pass oil filter
ELECTRONICS
8.7' lcd solor screen
200sets of mold memory
Barrel temperature monitoring and thermocouple break alarm
System hardware i/o testing function
Interface for printer and floppy drlver
Electric motor safety protection
Emergency stop safeguard device
RCCESSORIES
Adlustable machine leveling pads
Easily damaged spare parts
Professional tools
Manual
OPTIONRL DEVICE
Wide range of injection unit for specific appliaction
Spacific material screw and barrel
Accumulator fast injection
Core pull fittings
Air blast fittings
Glass water regulations
Extended nozzle
Product Tags:
|
|
0.5mm Thickness PP Cup High Speed Injection Moulding Machine 4s Cycle Time Images
|
